Validate incoming aircraft data before it reaches your M&E system.
The Aircraft Phase-In app automates the repeatable data checks, identifies inconsistencies and prepares structured data for loading into your M&E system, so your engineering team sees the issues before induction.

- Used by
- Technical records and transition teams
- Works with
- Your M&E system
- You get
- Exception reports and transfer files
- Runs
- One project per aircraft
The aircraft arrives on a fixed date. Its records arrive in every shape.
Delivery records come from the previous operator or lessor, in formats and quality you do not control. Checking them topic by topic by hand takes time, and every correction means checking again.
Same aircraft induction. Less repetitive checking.
| Without Aircraft Phase-In | With Aircraft Phase-In |
|---|---|
| Manually reconcile incoming aircraft data across different files and sources | Process structured aircraft data through a repeatable validation workflow |
| Manually perform and repeat consistency and applicability checks | Automatically run the configured checks and identify exceptions |
| Compile findings and prepare data for M&E loading by hand | Generate exception reports and transfer files for supported M&E systems |
| Repeat the relevant checks by hand after every correction | Rerun the validation after data corrections |
In both cases, engineers remain responsible for assessing findings, resolving technical discrepancies and approving the data.
Your aircraft induction checks, in one app.
The Aircraft Phase-In app covers the verification, the exception reporting and the load preparation for every airworthiness topic.
Applicability checks
Automatically applies the configured checks against aircraft configuration, effectivity and applicable requirements.
Exception reports
Identifies and categorises the discrepancies that need engineering review, with guidance per issue.
Load-ready transfer files
Prepares load-ready data files for your M&E system.
Run and rerun
Repeats the checks after corrections, without rebuilding the checking process.
One project per aircraft
Keeps validation results, findings and iterations organised for each induction.
Aircraft · Utilisation · Components · Rotable requirements · Modifications · Maintenance programme · Maintenance checks · Work orders · Structural damage
Works alongside your M&E system, which stays the system of record.
From delivery records to data you are ready to load.
Your team uploads the records and runs the checks. The app does the verification and prepares the files; your team decides when the data is ready.
- 01
Delivery records
Provide the aircraft records and data needed for induction.
- 02
Automated checks
The app applies configured checks and identifies inconsistencies.
- 03
Exception report
Review flagged issues and determine the required corrections.
- 04
Ready for loading
Rerun checks and prepare supported data for your M&E system.
The app performs the repeatable checks. Your engineers review the exceptions, resolve discrepancies and approve the data.
Find the issues before entry into service, not after the load.
Approval of the records and the load stay with your team.
Less repetitive manual data checking
The repeatable checks run in the app, not in spreadsheets.
Earlier visibility of missing or inconsistent information
Gaps surface while the records are still being prepared, not after the load.
Faster revalidation after corrections
Rerun the checks instead of repeating them by hand.
More engineering capacity for exceptions
Engineers spend their time on the findings that need judgment.
Records checked at induction are where trusted data starts.
The Aircraft Phase-In app verifies an aircraft’s data before it enters your M&E system, so everything built on it starts from a checked base.
Explore our approach →How EXSYN apps build on each other, from trusted data to earlier risk detection.
- Trusted DataWhere this app helps most
- Compliance Confidence
- Reliability & Operational Insight
- Early Risk Detection
Planning your next aircraft induction?
Show us how your team validates incoming aircraft data today. We will walk through which checks the Aircraft Phase-In app can automate, what exceptions it identifies and how it prepares data for your M&E system.
Or request the Masterfile template →- Which M&E system and environment will the aircraft be loaded into?
- How do the records arrive, and in what format?
- How many aircraft, and what are the entry-into-service dates?
- Which topics cost your team the most effort today?
Questions we often hear
The repeatable data checks on incoming aircraft records, the identification of inconsistencies, and the preparation of structured data for loading into your M&E system.
Applicability and consistency checks against aircraft configuration, effectivity and applicable requirements, across nine airworthiness topics: aircraft, utilisation, components, rotable requirements, modifications, maintenance programme, maintenance checks, work orders and structural damage.
Yes. It works alongside your M&E system, which stays the system of record, and prepares load-ready data files for it.
It is listed in an exception report, categorised and with guidance per issue. Your team corrects the data and reruns the validation.
Assessing the findings, resolving technical discrepancies and approving the data. The app performs the repeatable checks.
Yes. Rerun the validation after data corrections, without rebuilding the checking process. Each project keeps its iterations.
Yes. You follow the same steps as for a single aircraft. More aircraft take more time, but the process does not change.